Power supply and cooling module: two high-current connectors. Enclosure management module (EMM): 210-pin connector. Enclosure management module: two warm-swappable modules to. Help monitor and report component status. Split-bus module: one warm-swappable module with an external slide.Switch to change between split, joined and cluster modes. Terminator card: one warm-swappable module to terminate SCSI bus. If only one EMM is configured. Front panel: five status LED indicators for power, fault, split-bus. Hard-drive carrier: one single-color activity LED and one two-color. Status LED indicator per drive. Enclosure management module: three status LED indicators for power, fault, and primary or secondary functionality. Split-bus module: one LED indicator for power. Power supply Three status LED indicators for power supply status, power supply fault. And cooling module and AC status and two for cooling module fault. Voltage 100 240 volts rated (actual 85264). Amperage 9.4A at 100 volts, 4.6A at 200 volts.
Dimensions (H x W x D) 5.22" x 17.55" x 20 (13.2 cm x 44.5 cm x 50.8 cm). Weight PowerVault 220S 71.5 lbs. (32.4 kg) maximum redundant configuration.With all hard drives installed. PowerVault 221S 93.0 lbs. (42.2 kg) maximum redundant configuration with all hard drives installed.
Operating 50°F to 95°F (10°C to 35°C). Storage -40°F to 149°F (-40°C to 65°C). Operating 8% to 80% (noncondensing). Storage 8% to 95% (noncondensing). (-16 m to 3048 m).The item "Dell PowerVault 220s Disk array External Storage Enclosures" is in sale since Thursday, September 14, 2017. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Network Storage Disk Arrays\SAN Disk Arrays". The seller is "discountpros2013" and is located in Anaheim, California. This item can be shipped to United States.