Simple Storage Expansion for Capacity The PowerVault MD1000 expansion array leverages higher capacity 3.5 drives and supports mixing both SAS and SATA drives within a single enclosure making it ideal for high-capacity applications. The modular design enables simple expansion of your existing PowerVault MD3000 and MD3000i external controller based arrays by daisy chaining 2 additional MD1000 enclosures for a total of 45 drives.
The versatility of the PowerVault MD1000 enables you to configure the specific combination of storage resources you need now, and add more storage volume later, while ensuring life-cycle and usability of your hardware for the long-term. SAS drives are used for high performance storage Excellent Drive Flexibility The PowerVault MD family enables organizations to mix SAS and SATA drives delivering excellent flexibility to align data requirements with drive capabilities, speed, capacity and cost, to help optimize your storage environment. SAS for Performance SAS can deliver the speed, performance and reliability to satisfy mainstream single server applications.Nearline SAS - Performance of SAS, Capacities of SATA The new 7.2K RPM SAS drives leverage the performance efficiencies of SAS making it ideal for customer who are looking for the low cost per GB but can't sacrifice performance. In everyday usage situations customers can see up to a 30% performance increase with the 7.2 RPM SAS drive over the 7.2 RPM SATA drives.
SATA for capacity SATA for Capacity SATA disk drives deliver a compelling cost-per-Gigabyte alternative to SAS. SATA drives are ideal high capacity applications where data is accessed and modified less frequently, such as digital imaging, file archiving, audio/video storage, or back-up to disk applications. NEW Energy Efficient SATA The new 5.4K RPM SATA drive offers customers a high capacity, energy efficient alternative to traditional SATA drives. Ideal for capacity intensive applications in a power constrained environments. This 5.4K RPM SATA drive can reduce power consumption up to 30% with less than a10% degradation in random I/O performance over some 7.2K RPM SATA drives.
RAID PERC 6/E supports RAID levels 0, 1, 5, 6, 10, 50 and 60. PERC 5/E supports RAID levels 0, 1, 5, 10 and 50. Storage Hard Drives Up to fifteen (15) 1-inch-by-3.5-inch SAS hot-pluggable 3.0 Gbps hard drives, at speeds of 10,000 or 15,000 RPM Up to fifteen (15) 1-inch-by-3.5-inch SATA II hot-pluggable 3.0 Gbps hard drives, at speeds of 7,200 RPM Drive speeds and capacities SAS Drives 15,000 RPM SAS drives available in 73GB, 146GB, 300GB, 450GB and 600GB 10,000 RPM SAS drives available in 300GB, 400GB1 and 600GB Nearline SAS (7,200 RPM) drives available in 500GB, 750GB1 or 1TB1 SATA Drives 7,200 RPM SATA II drives available in 250GB, 500GB, 750GB1 or 1TB1 Energy efficient SATA II (5,400 RPM) drives available in 1TB1 and 2TB1 Maximum Capacity (per enclosure) 30TB using fifteen 2TB1 5,400 RPM SATA II disk drives in one enclosure Expansion Capabilities PERC RAID Controller enables expansion to 6 enclosures More Details on PERC PowerVault MD3000 and MD3000i enable expansion to 3 enclosures Connectivity Support for either of the following configurations: Unified mode (single path) for daisy chaining of up to 6 enclosures per PERC 6/E controller (3 enclosures per port, single path) Unified mode (redundant path) for daisy chaining up to 3 enclosures per PERC 6/E controller (3 enclosures connected to both ports via redundant path cabling) Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 though 6 and a separate connectivity to drives 7 through 14 Management Enclosure Management Modules (EMM): 1 or 2 modules A second EMM provides redundant enclosure management capability Back-Panel Connectors SAS connectors (per EMM): 1 12.0 Gbps SAS (SFF 8470) "IN" connector for connection to the host 1 12.0 Gbps SAS (SFF 8470) "OUT" connector for expansion to an additional enclosure Serial connector (per EMM): 1 6-pin UART mini-DIN connector for factory use only LED Indicators Front panel: 1 two-color LED indicator for system status 2 single-color LED indicators for power and split mod Hard-drive carrier: 1 single-color activity LED 1 two-color LED status indicator per drive EMM: 3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status Power supply/cooling fan module: 3 LED status indicators for power supply status, power supply/fan fault and AC status Power Wattage: 488 W maximum continuous; 550 W peak Heat dissipation: 200 W Voltage: 100-240 V rated (actual 90-264 V) Frequency: 47-63 Hz Amperage: 7.2 A at 100 V, 3.6 A at 200 V Available Hard Drive Power (per slot): Supported consumption Up to 1.3 A at +12 V; Up to 1.5 A at +5 V Chassis Height: 13.11 cm (5.16 inches) Width: 44.63 cm (17.57 inches) Depth: 48.01 cm (18.9 inches) Weight: 35.37 kg (78 lb) (maximum configuration) Environmental Operating Conditions Temperature: Operating: 10° to 35°C (50° to 95°F) Storage: -40° to 65°C (-40° to 149°F) Relative humidity: Operating: 20% to 80% (non-condensing) Storage: 5% to 95% (non-condensing) Altitude: Operating: -16 to 3048 m (-50 to 10,000 ft) Storage: -16 to 10,600 m (-50 to 35,000 ft) BTU per hour: 1430. The item "Dell PowerVault MD1000 DAS Storage Unit 15x1TB Dual SAS Controllers 2PS" is in sale since Friday, July 21, 2017. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Network Storage Disk Arrays\SAN Disk Arrays".The seller is "koike-aronson" and is located in Arcade, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Croatia, Bahamas, Uruguay, Bolivia, Jordan.