15 3.5 SAS/SATA Hot-Pluggable Hard Drives. Maximum Supported Capacity of 30TB as 15x 2TB SATA HDDs. 15K SAS in: 73/146/300/450/600GB 10K SAS in: 300/400/600GB.
Dual SAS Interface Controller w/ Battery & WB Cache Per Controller. Dual Port x4 1x Input 3GB SAS (SFF-8470), 1x Output 3GB SAS (SFF-8470).
No Power Cables, No Password Reset Cable, No External SAS Cables. Operating System Refer to RAID Card for details on supported Operating Systems: PERC 5/E Connectivity Support for either of the following configurations: Unified mode (single path) for daisy chaining of up to 6 enclosures per PERC 6/E controller (3 enclosures per port, single path) Unified mode (redundant path) for daisy chaining up to 3 enclosures per PERC 6/E controller (3 enclosures connected to both ports via redundant path cabling) Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 though 6 and a separate connectivity to drives 7 through 14 Environmental Operating Conditions Temperature.
Operating: 10° to 35°C (50° to 95°F). Storage: -40° to 65°C (-40° to 149°F). Operating: 20% to 80% (non-condensing).Storage: 5% to 95% (non-condensing). Operating: -16 to 3048 m (-50 to 10,000 ft). Storage: -16 to 10,600 m (-50 to 35,000 ft). 488 W maximum continuous; 550 W peak. 100-240 V rated (actual 90-264 V). 7.2 A at 100 V, 3.6 A at 200 V. Available Hard Drive Power (per slot). Up to 1.3 A at +12 V; Up to 1.5 A at +5 V. Management Enclosure Management Modules (EMM). A second EMM provides redundant enclosure management capability. Up to fifteen (15) 3 cm (1")-by-9 cm (3.5") SAS hot-pluggable 3.0 Gbps hard drives, at speeds of 10,000 or 15,000 RPM. Up to fifteen (15) 3 cm (1")-by-9 cm (3.5") SATA II hot-pluggable 3.0 Gbps hard drives, at speeds of 7,200 RPM. 15,000 RPM SAS drives available in 73GB, 146 GB, 300GB or 450GB. 10,000 RPM SAS drives available in 300GB, 400GB and 600GB. Nearline SAS (7,200 RPM) drives available in 500GB, 750GB or 1TB. 7,200 RPM SATA II drives available in 250GB, 500GB, 750GB or 1TB. Energy efficient SATA II (5,400 RPM) drives available in 1TB and 2TB. 30TB using fifteen 2TB 5,400 RPM SATA II disk drives in one enclosure. PERC RAID Controller enables expansion to 6 enclosures. PowerVault MD3000 and MD3000i enable expansion to 3 enclosures. Height 13 cm (5.16") Width 45 cm (17.57") Depth 48 cm (18.9) Weight 35.37 kg (78 lb) (maximum configuration).
PERC 6/E supports RAID levels 0, 1, 5, 6, 10, 50 and 60. PERC 5/E supports RAID levels 0, 1, 5, 10 and 50. Back-Panel Connectors SAS connectors (per EMM). 1 12.0 Gbps SAS (SFF 8470) "IN" connector for connection to the host.1 12.0 Gbps SAS (SFF 8470) "OUT" connector for expansion to an additional enclosure. 1 6-pin UART mini-DIN connector for factory use only Backplane Board. 15 SAS hard drive connectors; 2 power supply/cooling fan module connectors. 2 sets of EMM connectors (6 connectors each EMM). 1 control panel connector for front LEDs and enclosure mode switch. 1 two-color LED indicator for system status. 2 single-color LED indicators for power and split mod. 1 two-color LED status indicator per drive. 3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status. 3 LED status indicators for power supply status, power supply/fan fault and AC status. RAID Controllers PERC 6/E supports RAID levels 0, 1, 5, 6, 10, 50 and 60. Simple Storage Expansion for Capacity. The PowerVault MD1000 expansion array leverages higher capacity 3.5 drives and supports mixing both SAS and SATA drives within a single enclosure making it ideal for high-capacity applications. The modular design enables simple expansion of your existing PowerVault MD3000 and MD3000i external controller based arrays by daisy chaining 2 additional MD1000 enclosures for a total of 45 drives.
The versatility of the PowerVault MD1000 enables you to configure the specific combination of storage resources you need now, and add more storage volume later, while ensuring life-cycle and usability of your hardware for the long-term. SAS drives are used for high performance storage. The PowerVault MD family enables organizations to mix SAS and SATA drives delivering excellent flexibility to align data requirements with drive capabilities, speed, capacity and cost, to help optimize your storage environment. SAS can deliver the speed, performance and reliability to satisfy mainstream single server applications. Nearline SAS - Performance of SAS, Capacities of SATA.
The new 7.2K RPM SAS drives leverage the performance efficiencies of SAS making it ideal for customer who are looking for the low cost per GB but can't sacrifice performance. In everyday usage situations customers can see up to a 30% performance increase with the 7.2 RPM SAS drive over the 7.2 RPM SATA drives. SATA disk drives deliver a compelling cost-per-Gigabyte alternative to SAS. SATA drives are ideal high capacity applications where data is accessed and modified less frequently, such as digital imaging, file archiving, audio/video storage, or back-up to disk applications.The new 5.4K RPM SATA drive offers customers a high capacity, energy efficient alternative to traditional SATA drives. Ideal for capacity intensive applications in a power constrained environments. This 5.4K RPM SATA drive can reduce power consumption up to 30% with less than a10% degradation in random I/O performance over some 7.2K RPM SATA drives.
Orginally configured as the below system. NGenius In niStream 6900 Series Appliance. The nGenius® In niStream® 6900 series offers the most versatile nGenius Intelligent Data Source to the nGenius Service Assurance Solution. This appliance offers the highest port density available of any nGenius Intelligent Data Sources, enabling exibility in deployed environments. This appliance also offers a selection of storage options, satisfying the requirements for most enterprises.It is ideal for deployment in enterprise network distribution locations, edge environments, server farms or any location where there is a high concentration of network segments. Product Overview The nGenius In niStream 6900 appliance is a 3 rack unit (RU) appliance that provides storage capacity ranging from 4 TB (terabyte) to 16 TB of storage for always-on stream-todisk packet capture. This appliance also maintains exibility in available port con guration, supporting up to eight 1 GbE network monitoring interfaces or up to four 10 GbE network monitoring interfaces. Models of the nGenius In niStream appliance that support 1 GbE network monitoring interfaces use SFP media interface transceivers to allow it to connect using copper, single-mode or multi-mode ber. The 10 GbE network monitoring interfaces support XFP media interfaces transceivers to enable connectivity to either short range (SR) multi-mode ber (MMF) optic or long range (LR) single-mode ber (SMF) optic media. Resiliency Reliability and resiliency are essential requirements in todays high performance environments and the nGenius In niStream 6900 series has several key capabilities in this area including. RAID 6 storage to recover from the failure of up to two drives without loss of critical packet capture data Dual redundant power supplies Choice of AC or DC power supply models Solid state boot drive stores operating system and other systems functions, isolating critical functions to non-moving media. NGenius InniStream 6900 Series Appliance. Designed for high network concentration locations such as distribution sites, edge environments and server farms. Highest port density of any nGenius In niStream appliances, providing up to eight 1 GbE monitoring interfaces. Flexible storage options with capacities ranging from 4 TB through 16 TB which enables rightsizing of deployments.
Resilient appliance that provides RAID 6 storage only on systems with 16 drives and dual AC or DC power supplies to deliver greater availability. Future ready appliances will satisfy todays requirements with the capacity to allow for growth tomorrow. RAID 6 storage to recover from the failure of up to two drives without loss of critical packet capture data. Dual redundant power supplies Choice of AC or DC power supply models.
Solid state boot drive stores operating system and other systems functions, isolating critical functions to non-moving media. And server farms in particular, because of the high concentrations of trafc and conversations, are well covered by the nGenius InniStream 6900 appliances.
The exible storage capacity options offer the ability to right-size packet capture storage capacity with storage requirements based on trafc load. Secure Architecture nGenius InniStream is architected with a purpose built Linux® operating system and kernel, customized for secured operation. Unnecessary communications ports are disabled to minimize vulnerability to remote exploits and attacks and security patches are frequently applied with system updates.
Future Ready The nGenius InniStream 6900 series was designed to offer enough processing power, capture performance and storage capacity to provide years of service in environments that change rapidly. The modular software architecture provides the opportunity for future updates that enhance existing functionality as well as provide new functionality for years to come. NGenius Service Assurance Solution nGenius InniStream appliances serve as the data source for nGenius Service Assurance Solution, and helps extend visibility from the nGenius Analysis Modules to the networks to which the appliance connects. The nGenius InniStream 6900 appliance provides visibility into densely concentrated network segments that require strategic monitoring. The architecture of this solution uses the powerful local processing power of the nGenius InniStream appliance to perform packet analysis functions, efciently sending metadata to the nGenius Analysis Modules.
The nGenius InniStream appliance offers Adaptive Session Intelligence technology for analysis by nGenius Enterprise Intelligence. Deployment Practices The nGenius InniStream 6900 series combines powerful analysis within a exible, high port density appliance. The appliance may be effectively deployed within multi-segment environments that may take advantage of the high port concentration within the appliance to extend visibility across multiple segments simultaneously. Specications 6916 6910 6980 6990 6995 Rack Unit 3 Rack Unit (3RU) Weight 77Lbs.
60950, EN 60950, CB Report, UL-GS DEMKO. The item "Dell PowerVault MD1000 Direct Attached Storage SAS SATA PowerEdge 2950 15 x 2TB" is in sale since Thursday, April 19, 2018. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Network Storage Disk Arrays\SAN Disk Arrays". The seller is "pwscottiv" and is located in San Luis Obispo, California.This item can be shipped worldwide.