Dell PowerVault MD1200 Direct Attached Storage 12x 1TB HDD = 12TB 2x CTRL 2x PSU

Dell PowerVault MD1200 Direct Attached Storage 12x 1TB HDD = 12TB 2x CTRL 2x PSU

Dell PowerVault MD1200 Direct Attached Storage 12x 1TB HDD = 12TB 2x CTRL 2x PSU

Dell PowerVault MD1200 Direct Attached Storage 12x 1TB HDD = 12TB. In Good Condition, Full Working Order. 1 x Dell PowerVault MD1200 12-Bay SAS Storage Array Chassis. 12 x Dell 1TB SAS 7.2k 6GB/s Hot Plug Hard Drives. 2 x 600W Power Supplies.

1 x Dell PERC H800 RAID Adapter For JBOD With 512MB NV Cache. The MD1200 can be used an expansion array for the MD3200/MD3200i, or can be connected directly to a server using a PERC H800/H810 controller.

Dell PowerVault MD1200 direct-attached storage enclosure offers versatility and high-capacity storage for mainstream applications with optimal performance in sequential (streaming) applications. Seamless server and primary storage expansion for 6Gb/s SAS environments. Versatility for investment protection and data tiering. Support for the following configurations. Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path). Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling). Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11. 2 Enclosure Management Modules(EMM) provide redundant enclosure management capability. 1 SAS (SFF 8088) "IN" connector for connection to the host.

1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure. 1 6-pin UART mini-DIN connector (for factory use only). 1 two-color LED indicator for system status.

2 single-color LED indicators for power and split mode. 1 two-color LED status indicator per drive. 3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status. 1 single-color Unit Identification LED for each EMM.

3 LED status indicators for power supply status, power supply/fan fault and AC status. Two fully redundant power supplies; supports DC power. Wattage: AC - 600 W; DC 700 W. Heat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hr. Voltage: 100-240 VAC, auto sensing; 48V DC. Amperage: 8.6 A at 100 V, 4.3 A at 240 V. Available Drive Power (per slot). Supported drive power consumption (continuous). Up to 1.16 A at +5V. Up to 1.6 A +12V.

8.7cm (3.43 inches). 48.2cm (18.98 inches). 59.4 (23.39 inches). 28.39 kg (62.6 lb) (maximum configuration). 8.84 kg (19.5 lb) (empty).

Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour. Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour. Supports Fresh Air cooling, up to 35 degrees Celsius.

Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour. Storage: 5% to 95% (non-condensing). Operating: -16 to 3048 m (-50 to 10,000 ft). Storage: -16 to 10,600 m (-50 to 35,000 ft).

Refer to RAID Card for details on supported Operating Systems. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered. The item "Dell PowerVault MD1200 Direct Attached Storage 12x 1TB HDD = 12TB 2x CTRL 2x PSU" is in sale since Friday, July 26, 2019. This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Network Storage Disk Arrays\Other Network Disk Arrays".

The seller is "itinstock" and is located in North London. This item can be shipped worldwide.


Dell PowerVault MD1200 Direct Attached Storage 12x 1TB HDD = 12TB 2x CTRL 2x PSU